Sabiuta II

Sabiuta II

Sabiuta II is an unglazed porcelain tile from Master Ceramicists. Sabiuta is classified as a Nano-hydrophilic ceramic. When installed vertically, these ceramics have additional properties that further help to resist mud, dirt, dust, gas emissions, soot and smoke.

Color

Beige HAL-25BN/SUT-13

Size

9” x 13”

Finish

Glazed

Print Spec Sheet
NameSabiuta II
Primary ColorGrey
FinishGlazed
Size Nominal9” x 13”All sizes are nominal and in inches. Special cut sizes and addition trim pieces are available upon request.
Thickness8.5MM,10MMMost of our tiles are rectified, however we recommend confirming with us.
MaterialMosaic - Porcelain
TypeMosaicMost of our tiles are rectified, however we recommend confirming with us.
ApplicationsInterior Wall, Exterior Cladding, Wet Areas"Wet" application only applies to matte or textured finishes
Trim Pieces AvailableYes
Tile VariationCOLORVARI
LookPattern
Traffic WearHeavy Commercial
KPGD Item Code4940 MOP 90 00322-S

All Available Sizes: 9X13

All Available Finishes: Glazed

**Notes

  • All sizes are nominal. Special cut sizes are available upon request.
  • Most of our porcelain tiles are rectified, however we recommend confirming with us.
  • Natural Stone slabs sizes are to be confirmed at the time of order.
  • Tiles, cut-to-size, and dimensional stone are available upon request.
  • The customer acknowledges that it is their responsibility to ensure that tiles ordered meet the required Dynamic Coefficient of Friction (DCOF) standards for safety. In the event that tiles are installed that do not meet DCOF requirements and any incidents occur, the company (KPGD) shall not be held responsible or liable for any related incidents for, accidents, or damages. It is recommended that customers verify DCOF compliance before installation to prevent any potential safety risks.
NameSabiuta II
Primary ColorGrey
FinishGlazed
Size Nominal9” x 13”All sizes are nominal and in inches. Special cut sizes and addition trim pieces are available upon request.
Thickness8.5MM,10MMMost of our tiles are rectified, however we recommend confirming with us.
MaterialMosaic - Porcelain
TypeMosaicMost of our tiles are rectified, however we recommend confirming with us.
ApplicationsInterior Wall, Exterior Cladding, Wet Areas"Wet" application only applies to matte or textured finishes
Trim Pieces AvailableYes
Tile VariationCOLORVARI
LookPattern
Traffic WearHeavy Commercial
KPGD Item Code4940 MOP 90 00322-S

Sabiuta II is an unglazed porcelain tile from Master Ceramicists. Sabiuta is classified as a Nano-hydrophilic ceramic. When installed vertically, these ceramics have additional properties that further help to resist mud, dirt, dust, gas emissions, soot and smoke.

NameSabiuta II
Primary ColorGrey
FinishGlazed
Size Nominal9” x 13”All sizes are nominal and in inches. Special cut sizes and addition trim pieces are available upon request.
Thickness8.5MM,10MMMost of our tiles are rectified, however we recommend confirming with us.
MaterialMosaic - Porcelain
TypeMosaicMost of our tiles are rectified, however we recommend confirming with us.
ApplicationsInterior Wall, Exterior Cladding, Wet Areas"Wet" application only applies to matte or textured finishes
Trim Pieces AvailableYes
Tile VariationCOLORVARI
LookPattern
Traffic WearHeavy Commercial
KPGD Item Code4940 MOP 90 00322-S