Pallas - White

Pallas - White

Pallas - White is a type of engineered stone that is made from carefully selected natural marble chips and powders. The chips and powders are mixed with thermoset polyester resin in a high-pressure environment and processed with the latest Breton technology. This results in a precast material that is both functional and beautiful. The resulting precast material is ideally suited to interior design.
Size

49” x 120”

Finish

Brushed, Honed, Polished

Print Spec Sheet
NamePallas - White
Primary ColorWhite
FinishBrushed
Size Nominal49” x 120”All sizes are nominal and in inches. Special cut sizes and addition trim pieces are available upon request.
Thickness12MM,20MM,30MM,40MMMost of our tiles are rectified, however we recommend confirming with us.
MaterialAgglomerate - Marble
TypeSlabMost of our tiles are rectified, however we recommend confirming with us.
ApplicationsInterior Floor, Interior Wall"Wet" application only applies to matte or textured finishes
Trim Pieces AvailableNo
LookTerrazzo
Traffic WearHeavy Commercial
Dynamic Coefficient of FrictionMORE THAN .42 DCOF
KPGD Item Code2055 MAG 02 00447-S

All Available Sizes: 49X120, 24X24, 24X16, 24X12, 20X12, 16X16, 12X12

All Available Finishes: Brushed, Honed, Polished, 1 Side Polished; 1 Side Honed

**Notes

  • All sizes are nominal. Special cut sizes are available upon request.
  • Most of our porcelain tiles are rectified, however we recommend confirming with us.
  • Natural Stone slabs sizes are to be confirmed at the time of order.
  • Tiles, cut-to-size, and dimensional stone are available upon request.
  • The customer acknowledges that it is their responsibility to ensure that tiles ordered meet the required Dynamic Coefficient of Friction (DCOF) standards for safety. In the event that tiles are installed that do not meet DCOF requirements and any incidents occur, the company (KPGD) shall not be held responsible or liable for any related incidents for, accidents, or damages. It is recommended that customers verify DCOF compliance before installation to prevent any potential safety risks.
NamePallas - White
Primary ColorWhite
FinishBrushed
Size Nominal49” x 120”All sizes are nominal and in inches. Special cut sizes and addition trim pieces are available upon request.
Thickness12MM,20MM,30MM,40MMMost of our tiles are rectified, however we recommend confirming with us.
MaterialAgglomerate - Marble
TypeSlabMost of our tiles are rectified, however we recommend confirming with us.
ApplicationsInterior Floor, Interior Wall"Wet" application only applies to matte or textured finishes
Trim Pieces AvailableNo
LookTerrazzo
Traffic WearHeavy Commercial
Dynamic Coefficient of FrictionMORE THAN .42 DCOF
KPGD Item Code2055 MAG 02 00447-S
Pallas - White is a type of engineered stone that is made from carefully selected natural marble chips and powders. The chips and powders are mixed with thermoset polyester resin in a high-pressure environment and processed with the latest Breton technology. This results in a precast material that is both functional and beautiful. The resulting precast material is ideally suited to interior design.
NamePallas - White
Primary ColorWhite
FinishBrushed
Size Nominal49” x 120”All sizes are nominal and in inches. Special cut sizes and addition trim pieces are available upon request.
Thickness12MM,20MM,30MM,40MMMost of our tiles are rectified, however we recommend confirming with us.
MaterialAgglomerate - Marble
TypeSlabMost of our tiles are rectified, however we recommend confirming with us.
ApplicationsInterior Floor, Interior Wall"Wet" application only applies to matte or textured finishes
Trim Pieces AvailableNo
LookTerrazzo
Traffic WearHeavy Commercial
Dynamic Coefficient of FrictionMORE THAN .42 DCOF
KPGD Item Code2055 MAG 02 00447-S